Attaching
the stator
Fig. 77: Attaching the stator
1. Push the stator with ring (3) onto the shaft, taking care to pay attention
2. Fit the cover plate (2).
3. Evenly screw all three screws (1) firmly in place such that a uniform gap
92
CAUTION
Magnetism!
Work carefully and in a controlled manner, since the
stator can be pulled out of your hands.
①
②
(1) - Screws
(2) - Cover plate
to the ring gap for the cable.
exists between the cover plate (2) and shaft.
Machines with integrated motor
③
(3) - Stator with ring
Service Manual 867 Version 02.0 - 04/2015