Attaching
Fig. 79: Attaching the cover
the cover
1. Carefully attach the upper cover (2) from the side, paying attention to
2. Tighten all five screws (1).
3. Attach the lower cover (5) and tighten all three screws (4).
Locking the
Fig. 80: Locking the machine in place
machine in place
1. Lock the machine in place using the Ø3 mm locking peg (1).
The needle is in the top dead center position.
94
①
②
③
④
(1) - Screws
(2) - Upper cover
(3) - Dial
the dial (3) in doing so.
①
(1) - Locking peg
Machines with integrated motor
⑤
(4) - Screws
(5) - Lower cover
(depending on machine)
Service Manual 867 Version 02.0 - 04/2015