Using Variable - Xerox DocuColor 2240 User Manual

Using Variable%

1
Load your originals and select the mailbox for saving the scanned
data.
2
On the Scan Options screen, select Reduce/Enlarge. The
Reduce/Enlarge screen is displayed.
3
Select Variable%.
4
Perform one of the following:
• Press the up arrow to increase the percentage value in
increments of 1.
• Press the down arrow to decrease the percentage value in
decrements of 1.
• Use the Numeric Keypad on the Control Panel to enter a
specific percentage from 25% - 400%. Use C to clear the
value entered.
5
Select additional scanning features, or press Start to begin
scanning.
U G ( S )
S E R U I D E C A N
3–13