Kemppi FastMig MXP 37 Pipe Steel Operating Manual page 11

Wire feed rolls, plastic
Fe, Ss, (Al, Mc, Fc)
V-groove
Fc, Mc, (Fe)
V-groove, knurled
Al, (Fc, Mc, Ss, Fe)
U-groove
Wire feed rolls, metal
Fe, Ss, (Al, Mc, Fc)
V-groove
Fc, Mc, (Fe)
V-groove, knurled
Fc, Mc, Ss, Fe
U-groove
Mount the lower feed roll, ensuring that the pin on the shaft fits in the cut on the feed roll.
NOTE!
© Kemppi Oy / 1312
ø mm lower
0.6 W001045
0.8 – 0.9 W001047
1.0 W000675
1.2 W000960
1.4 W001049
1.6 W001051
2.0 W001053
2.4 W001055
1.0 W001057
1.2 W001059
1.4 – 1.6 W001061
2.0 W001063
2.4 W001065
1.0 W001067
1.2 W001069
1.6 W001071
ø mm lower
0.8 – 0.9 W006074
1.0 W006076
1.2 W004754
1.4 W006078
1.0 W006080
1.2 W006082
1.4 – 1.6 W006084
2.0 W006086
1.0 W006088
1.2 W006090
1.6 W006092
upper
W001046
W001048
W000676
W000961
W001050
W001052
W001054
W001056
W001058
W001060
W001062
W001064
W001066
EN
W001068
W001070
W001072
upper
W006075
W006077
W004753
W006079
W006081
W006083
W006085
W006087
W006089
W006091
W006093
9