Canadian Notice; Emc Notice; General Information; Electromagnetic Emissions - Barco Eonis MDRC-2122 WP User Manual

22–inch clinical display
Hide thumbs Also See for Eonis MDRC-2122 WP:
Table of Contents

Advertisement

7. Important information
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.

Canadian notice

This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme à la norme NMB-001 du Canada.
7.4

EMC notice

General information

No specific requirement on the use of external cables or other accessories except power supply.
With the installation of the device, use only the delivered power supply or a spare part provided by the
legal manufacturer. Using another can result in a decrease of the immunity level of the device.

Electromagnetic emissions

The Eonis display is intended for use in the electromagnetic environment specified below. The customer
or the user of the Eonis display should assure that it is used in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/ flicker
emissions
IEC 61000-3-3
This Eonis display complies with appropriate medical EMC standards on emissions to, and interference
from surrounding equipment. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
Interference can be determined by turning the equipment off and on.
If this equipment does cause harmful interference to, or suffer from harmful interference of, surrounding
equipment, the user is encouraged to try to correct the interference by one or more of the following mea-
sures:
Reorient or relocate the receiving antenna or equipment.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced technician for help.
Electromagnetic immunity
The Eonis display is intended for use in the electromagnetic environment specified below. The customer
or the user of the Eonis display should assure that it is used in such an environment.
28
Compliance
Group 1
Class B
Class D
Complies
Electromagnetic environment –
Guidance
The Eonis display uses RF energy
only for its internal function.
Therefore, its RF emissions are
very low and are not likely to
cause any interference in nearby
electronic equipment.
The Eonis display is suitable
for use in all establishments,
including domestic establishments
and those directly connected to
the public low-voltage power
supply network that supplies
buildings used for domestic
purposes.
K5903049 EONIS 25/06/2015

Advertisement

Table of Contents
loading

Table of Contents