Messages Displayed When Using The Scanner Function - Ricoh SP 3600SF User Manual

9. Troubleshooting
Message
"Replcmnt Requrd Drum
Unit"
"Repl Requrd Soon Maint.
Kit"
"Rplcmnt Rqrd Soon:Drum
Unit"
"Set the Drum Unit correctly." The drum unit may not be
"Set the Maintenance Kit
correctly."
"Set the Toner Cartridge
correctly."
"Supply order has failed."
"Waste Toner almost full"
"Waste Toner full"

Messages Displayed When Using the Scanner Function

This section describes likely causes of and possible solutions for the error messages that appear on the
control panel. If a message not described here appears, act according to the message.
110
Causes
You need to replace the
drum unit.
You will need to replace the
maintenance kit soon.
You will need to replace the
drum unit soon.
installed correctly.
The fusing unit may have not
been installed correctly.
The print cartridge may have
not been installed correctly.
The automatic supply order
failed.
The print cartridge must be
replaced when the life of the
waste toner is ending.
The waste toner is full.
Solutions
For details, see "Replacing Drum Unit",
Maintenance and Specifications
Contact your sales or service
representative to obtain a new unit.
Contact your sales or service
representative to obtain a new unit.
Turn the machine off, and then install
the drum unit again.
Turn the machine off, and then install
the fusing unit again.
If the message continues to appear
after the unit is installed again, contact
your sales or service representative.
Turn the machine off, and install the
print cartridge again.
The message indicates the machine
tried to order the supplies.
Prepare a new print cartridge.
Replace the print cartridge. For details,
see "Adding Toner", Maintenance and
Specifications .
.