Ricoh SP 3600SF User Manual page 71

3. Enter the path for the folder
In the following example path, the shared folder name is "user" and the computer name is
"desk01":
\\desk01\user
4. Depending on the destination setting, enter the user name for logging in to the computer
Press [OK]
5. Depending on the destination setting, enter the password for logging in to the computer
Press [OK]
6. Press [Com.Test]
A connection test is performed to check whether the specified shared folder exists.
If the message "Connection to PC failed. Check the settings." appears, see page 110 "Messages
Displayed When Using the Scanner Function".
7. Check the connection test result
8. Press [OK]
Press [OK]
Press [Exit]
Basic Procedure for Using Scan to Folder
69