Ricoh SP 3600SF User Manual page 104

9. Troubleshooting
Problem
An error message remains,
even if misfed paper is
removed.
An error message remains
displayed even if the
indicated cover is closed.
Original images are printed
on the reverse side of the
paper.
Misfeeds occur frequently.
102
Causes
• When a misfeed
message appears, it
remains until you open
and close the cover as
required.
• Paper is still jammed in
the tray.
One or more covers that are
not indicated are still open.
You may have loaded the
paper incorrectly.
Using curled paper often
causes misfeeds, soiled
paper edges, or slipped
positions while performing
stack printing.
Solutions
After removing misfed paper, fully
open the front cover, and then close it.
For details about removing jammed
paper, see "Removing Jammed Paper",
Troubleshooting .
Close all the covers of the machine.
• Load paper into the paper trays
with the print side down.
• Load paper into the bypass tray
with the print side up.
• Take the stiffness out of the paper
with your hands to straighten out
the curl.
• Load the paper up side down so
that the curled edges face
downward. For details about
recommended paper, see
"Recommended Paper", Paper
Specifications and Adding Paper
.
• Lay paper on a flat surface to
prevent paper from curling, and
do not lean it against the wall. For
details about the proper way to
store paper, see "Paper Storage",
Paper Specifications and Adding
Paper .