Front Left Bezel - HP ProLiant DL385 G5p Maintenance And Service Manual

Remove the three T-10 Torx screws, and then detach the front bezel.
2.
To replace the component, reverse the removal procedure.

Front left bezel

To remove the component:
Power down the server (on page 26).
1.
Extend or remove the server from the rack
2.
server from the
Remove the access panel
3.
Remove the PCI riser cage
4.
Remove the air baffle
5.
Extend or remove the Systems Insight Display
6.
Disconnect the System Insight Display cable from the system board.
7.
rack" on page 25).
("Access panel" on page 30).
("PCI riser cage" on page 38).
("Air baffle" on page 39).
("Remove the server from the
("Systems Insight Display" on page 33).
Removal and replacement procedures 34
rack" on page 27, "Extend the