Processor - HP ProLiant DL385 G5p Maintenance And Service Manual

Remove the power supply cage assembly.
10.
To replace the component, reverse the removal procedure.

Processor

CAUTION:
should attempt to replace or install the processor in this server.
CAUTION:
configurations must contain processors with the same part number.
To remove a processor:
Power down the server (on page 26).
1.
Extend the server from the rack (on page 25).
2.
Remove the access panel
3.
Remove the PCI riser cage
4.
Remove the air baffle
5.
Remove the heatsink ("Heatsink" on page 46).
6.
To avoid damage to the processor and system board, only authorized personnel
To prevent possible server malfunction and damage to the equipment, multiprocessor
("Access panel" on page 30).
("PCI riser cage" on page 38).
("Air baffle" on page 39).
Removal and replacement procedures 49