Remove the expansion board.
7.
To replace the component, reverse the removal procedure.
Full-length expansion board
To remove the component:
Power down the server (on page 26).
1.
Extend the server from the rack (on page 25).
2.
Remove the access panel
3.
Disconnect any external cables that are connected to the expansion board.
4.
Remove the PCI riser cage
5.
Disconnect any internal cables that are connected to the expansion board.
6.
Remove the expansion board.
7.
("Access
panel" on page 30).
("PCI riser
cage" on page 38).
Removal and replacement procedures 43