Apply all the grease to the top of the processor in one of the following patterns to ensure even
6.
distribution:
Install the heatsink.
7.
Close and lock the heatsink retaining latches.
8.
Install the air baffle.
9.
Install the PCI riser cage
10.
Install the access panel
11.
Install the server into the rack.
12.
Power up the server.
13.
DIMMs
To remove the component:
Power down the server (on page 26).
1.
Extend or remove the server from the rack
2.
server from the
Remove the access panel
3.
Remove the PCI riser cage
4.
Remove the air baffle
5.
("PCI riser
cage" on page 38).
("Access
panel" on page 30).
rack" on page 25).
("Access
panel" on page 30).
("PCI riser
cage" on page 38).
("Air
baffle" on page 39).
("Remove the server from the
Removal and replacement procedures 53
rack" on page 27,
"Extend the