Expansion Boards; Half-Length Expansion Board - HP ProLiant DL385 G5p Maintenance And Service Manual

To remove slot covers 5 and 6, push down on the latch, rotate the latch down, and then remove the
o
cover.

Expansion boards

Half-length expansion board

To remove the component:
Power down the server (on page 26).
1.
Extend the server from the rack (on page 25).
2.
Remove the access panel
3.
Disconnect any external cables that are connected to the expansion board.
4.
Remove the PCI riser cage
5.
Disconnect any internal cables that are connected to the expansion board.
6.
("Access panel" on page 30).
("PCI riser cage" on page 38).
Removal and replacement procedures 42