Sequence Of An Automatic Programme; Changing Settings During A Programme; Cancelling Cooking - Miele DGC 6500 Operating And Installation Instructions

Operation: Combination cooking mode
Sequence of an automatic
programme
Up until the start time the function,
the selected temperature and moisture
level, and the start time will
Start at
appear in the display.
After the start time during the heating-
up phase you can follow the
temperature increasing in the display.
When the required temperature is
reached a tone or a melody will sound
(see "Settings - Acoustic information").
After the heating-up phase you can
follow the time counting down in the
display. The last minute counts down in
seconds.
At the end of the cooking process the
steam generator and oven
compartment lighting will switch off. A
tone or a melody will sound (see
"Settings - Acoustic information").
(only with temperatures
Steam reduction
of approx. 80 - 100 °C and 100 %
moisture) and
Process finished
appear in the display.
You have the option of saving your
settings as a User programme (see
"User programmes"). Touch  to go
to the main menu.
44
Changing settings during a
programme
 Select
The following will appear in the display:
– all individual cooking stages
–
Add cooking stage
You can change the specified settings
for a cooking stage or add more
cooking stages to the programme.
 Select the cooking stage you want to
change or
 Alter the cooking stages as you wish
(see "Simple operation") and confirm
with OK.
A summary of your settings will appear
in the display.
 Check the settings and confirm with
Accept
settings or to add further cooking
stages.
will

Cancelling cooking

 Touch .
Cancel cooking?
 Select
The list of functions will appear. Any
cooking durations set will be deleted.
If you press  again the main menu
will appear.
.
Change
Add cooking stage
or select
Change
appears in the display.
.
Yes
.
to correct the