Changing The Function; Changing Settings During A Programme - Miele DGC 6500 Operating And Installation Instructions

Switching off Rapid heat-up
 Select .
Change
 Select
Heating-up phase
 Select .
Normal
 Confirm with OK.
Rapid heat-up has been switched off.
Heating-up phase

Changing the function

You can change the cooking function
during operation.
 Select .
Change
 Select
Change function
 Select the function you want.
The new function will appear in the
display together with its recommended
temperature.
Any cooking durations set will be
adopted. If you change to
or
cooking Combi mode
a new duration.
 Change the temperature and/or
cooking duration if necessary.
 Confirm with OK.
The function has been changed.
Operation: Functions without steam
.
appears in the display.
.
Steam
, you must enter
Changing settings during a
programme
 Select .
Change
The following will appear in the display:
– or
Temperature
–
Duration
–
Core temp.
This option only appears when you
are using the food probe.
–
Ready at
A and
Duration Ready at
entered if you are using the food
probe. When using the food probe,
the end of the cooking duration is
determined by when the set core
temperature is reached.
–
Start at
Only appears if you have set
or or when using the food
Ready at
probe.
–
Heating-up phase
Only appears if you have set a
temperature of more than 100 °C in
and
Fan plus Conventional heat
–
Change function
Grill setting
time cannot be
Duration
.
51