Advanced Operation; Switching On And Off Automatically - Miele DGC 6500 Operating And Installation Instructions

Advanced operation

Setting further durations
You have placed the food in the oven
and selected the settings for the
programme.
You can set the programme to switch
on and off automatically by setting
or
Ready at Start at
–
Ready at
You specify the time you want
cooking to stop.
–
Start at
You specify the time you want
cooking to start.
Cooking results can be impaired if
there is a long delay between the
food being placed in the oven and
the start of cooking. Fresh food can
change colour and even deteriorate.
If the temperature in the oven is too
high, e.g. just after another
programme, you will not be able to
use this function.
will not appear in the display if this is
the case. Open the oven door until the
appliance has cooled down.
A time cannot be entered if
Ready at
you are using the food probe. When
using the food probe, the end of the
cooking duration is determined by
when the set core temperature is
reached. Only
Start later
selected.
Operation: Combination cooking mode
.
and
Ready at Start at
can be

Switching on and off automatically

To switch a cooking programme on and
off automatically you have a choice of
how to enter the time parameters:
– and
Duration Ready at
– and
Duration Start at
Example: it is 11:45. The food takes 5
minutes to cook and should be ready at
12:30.
 Enter a cooking duration of 5 minutes
for the 1st cooking stage (see
"Simple operation").
When you have selected the settings
for the cooking programme:
 Select
Ready at
 Confirm with OK.
is calculated automatically.
Start at
12:25 appears in the display.
Start at
The cooking process will start
automatically at this time.
and set 12:30.
43