Tire Terminology And Definitions - Jeep 2016 Wrangler Owner's Manual

504 STARTING AND OPERATING

Tire Terminology And Definitions

Term
B-Pillar
Cold Tire Inflation Pressure
Maximum Inflation Pressure
Recommended Cold Tire Inflation
Pressure
Tire Placard
The vehicle B-Pillar is the structural member of the body located
behind the front door.
Cold tire inflation pressure is defined as the tire pressure after
the vehicle has not been driven for at least three hours, or driven
less than 1 mile (1.6 km) after sitting for a minimum of three
hours. Inflation pressure is measured in units of PSI (pounds per
square inch) or kPa (kilopascals).
The maximum inflation pressure is the maximum permissible
cold tire inflation pressure for this tire. The maximum inflation
pressure is molded into the sidewall.
Vehicle manufacturer's recommended cold tire inflation pressure
as shown on the tire placard.
A label permanently attached to the vehicle describing the vehi-
cle's loading capacity, the original equipment tire sizes and the
recommended cold tire inflation pressures.
Definition