Jeep 2016 Wrangler Owner's Manual page 128

126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
first call, refer to "Toggling Between Calls" in this
section. To combine two calls, refer to "Conference
Call" in this section.
Place/Retrieve A Call From Hold
To put a call on hold, push the Phone
you hear a single beep. This indicates that the call is on
hold. To bring the call back from hold, push and hold the
Phone button until you hear a single beep.
Toggling Between Calls
If two calls are in progress (one active and one on hold),
push the Phone button until you hear a single beep,
indicating that the active and hold status of the two
calls have switched. Only one call can be placed on
hold at a time.
Conference Call
When two calls are in progress (one active and one on
hold):
1. Push and hold the Phone
button until double beep, indicating that the two calls have been
joined into one conference call.
Three-Way Calling
To initiate three-way calling, push the Voice Command
button while a call is in progress, and make a
second phone call, as described under "Making a
Second Call While Current Call is in Progress." After
the second call has established, push and hold the
Phone
cating that the two calls have been joined into one
conference call.
button until you hear a
button until you hear a double beep, indi-