List Or Browse Mode - Jeep 2016 Wrangler Owner's Manual

• Use the << SEEK and SEEK >> buttons to jump to the
previous or next track. Pushing the SEEK >> button
during play mode will jump to the next track in the
list, or push the VR button and say Next or Previous
Track.
• While a track is playing, push the INFO button to see
the associated metadata (artist, track title, album, etc.)
for that track. Pushing the INFO button again jumps to
the next screen of data for that track. Once all screens
have been viewed, the last INFO button push will go
back to the play mode screen on the radio.
• Pushing the REPEAT button will change the audio
device mode to repeat the current playing track or
push the VR button and say Repeat ON or Repeat
Off.
• Push the SCAN button to use iPod/USB/MP3 device
scan mode, which will play the first ten seconds of
each track in the current list and then forward to the
UNDERSTANDING YOUR INSTRUMENT PANEL 407
next song. To stop SCAN mode and start playing the
desired track, when it is playing the track, push the
SCAN button again. During Scan mode, pushing the
<< SEEK and SEEK >> buttons will select the previous
and next tracks.
• RND button (available on sales code RES radio only):
Pushing this button toggles between Shuffle ON and
Shuffle OFF modes for the iPod or external USB
device, or push the VR button and say Shuffle ON or
Shuffle Off. If the RND icon is showing on the radio
display, then the shuffle mode is ON.

List Or Browse Mode

During Play mode, pushing any of the buttons described
below, will bring up List mode. List mode enables
scrolling through the list of menus and tracks on the
audio device.
4