Using The Clip Menu; Displaying Clip Information - Canon EOS C300 Mark II Instruction Manual

Digital cinema camera
Hide thumbs Also See for EOS C300 Mark II:
Table of Contents

Advertisement

Using the Clip Menu

1 Select a clip and then press SET.
• The clip menu appears. Available functions depend on the index screen and which functions are enabled.
2 Select the desired function and then press SET.
• The function is enabled. For some functions, further action may be required. Follow the onscreen directions.
• Press the CANCEL button instead to return to the clip index screen.
IMPORTANT
• Observe the following precautions while an access indicator is illuminated in red. Failure to do so may result in
permanent data loss.
- Do not disconnect the power source or turn off the camera.
- Do not open the card slot cover of the card being accessed and do not remove the card.
NOTES
• To perform operations on proxy clips recorded on an SD card, make sure the LOCK switch on the SD card is
not set to prevent writing.

Displaying Clip Information

Select [Display Clip Info] in the clip menu to display the selected clip's information screen ([Clip Info] screen).
Push the joystick left/right to switch to the previous/next clip. When you have finished, press the CANCEL button
to return to the clip index screen.
1
2
3
1 Thumbnail of the selected clip
2 Thumbnail of the next clip
3 Thumbnail of the previous clip
4 Recording media
Primary clips: CFast card (the one currently
selected appears in white)
8
Proxy clips: SD card
5 Clip geotagged with GPS information (A 108,
128)
6 Special recording mode (A 113)
7 Clip number / Total number of clips
* For clips recorded using slow & fast motion recording, the shooting frame rate and playback frame rate will both be displayed.
4
5
6
8 Recording date and time
9 Clip file name (A 59)
10 Compression, bit rate and resolution (A 62)
11 Frame rate* (A 62)
12 Relay clip (A 150), shot mark (A 105, 158),
$ mark / % mark (A 105, 154) icons
13 Embedded custom picture file (A 134)
14 Color sampling (A 62)
15 Clip's start time code
16 Clip's end time code
17 Clip duration
Clip Operations
7
8
9
10
11
12
13
14
15
16
17
153

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents