Applying A Lut To Screens/Video Outputs - Canon EOS C300 Mark II Instruction Manual

Applying a LUT to Screens/Video Outputs

While recording using special gamma curves, you can apply a LUT to
video output from the REC OUT terminal, MON. terminal or HDMI OUT
terminal and to the image displayed on the LCD screen or viewfinder.
When a LUT is applied, the displayed image will look as if a standard
gamma curve and color space were used, making it easier to check the
image on the display device used. To check the image on an external
monitor, you will need a monitor that is compatible with the selected color
space.
Available LUT options by gamma curve and color space
Available LUTs depend on the combination of gamma curve and color space used, whether it was set through
one of the [/ Custom Picture] > [Preset] settings or through the individual [/ Custom Picture] > [Main
Settings] > [Gamma] or [Color Space] settings.
[Gamma]
[Canon Log 2]
[Canon Log]
[Wide DR]
* Only when [/ Custom Picture] > [Preset] is set to [Canon Log 2: C.Gamut].
Operating modes:
1 Open the LUT's [Activate] submenu.
Assistance Functions] > [LUT] > [Activate]
[
2 Select [On] and then press SET.
3 Select [MON. & HDMI (2K)], [REC OUT (2K)] or [LCD & VF] and then press SET.
4 Select the desired option and then press SET.
• Repeat steps 3 and 4 as necessary to select the LUT applied to other output terminals/displays.
• The gamma curve and color space of the video output will change.
• For the LCD screen and viewfinder, only the [BT.709] LUT is available.
• If a LUT is not needed, select [Off].
Options
Output Settings with LUT applied
Applied LUT
Gamma curve
[BT.709] Wide DR
[BT.2020] Wide DR
[DCI] DCI
[ACESproxy10] ACESproxy10
[Off] –
[Color Space]
[BT.709]
Ü
[Cinema Gamut]
Ü
[BT.2020 Gamut]
Ü
[DCI-P3 Gamut]
Ü
[BT.709 Gamut]
Ü
[BT.709 Gamut]
Ü
[BT.2020 Gamut]
Color space
LUT for viewing on the camera's LCD screen and viewfinder or external monitors
BT.709
compatible with BT.709 specifications.
LUT for viewing on external monitors compatible with ITU-R BT.2020 standards, which
BT.2020
define parameters for ultra-high-definition television (4K/8K).
LUT for viewing on external monitors that support color spaces and gamma curves that
DCI-P3
follow the guidelines established by DCI (Digital Cinema Initiatives).
LUT for viewing on external monitors compatible with the ACESproxy10 standard
ACES
established by ACES (Academy Color Encoding System).
– No LUT applied.
Connecting to an External Monitor or Recorder
[ Assistance Functions]
[Activate] ..... [Off]
[MON. & HDMI (2K)] ..... [Off]
[REC OUT (2K)] ..... [Off]
[LCD & VF] ..... [Off]
Available LUTs
[BT.2020] [DCI]
Ü Ü
Ü
–
Ü
–
– –
– –
– –
Description
[LUT]
167
[ACESproxy10]
Ü*
–
–
–
–
–