Canon EOS C300 Mark II Instruction Manual page 187

• When this setting is set to [MON.+HDMI+LCD(VF)], the LCD screen and viewfinder cannot be used
simultaneously.
• The REC OUT terminal can be used to monitor the camera's picture at all times (as long as [3 Recording/
Media Setup] > [REC OUT 4K RAW Mode] is set to a setting other than [Off]).
• In mode, the playback picture will be displayed on all screens and output from all active terminals.
[Genlock Adjustment]: The phase difference between the external Genlock signal and the camera is initially set
to 0. This function allows you to adjust it within the range of approx. ±0.4 H (-1023 to 1023). When setting to
1000 or more or -1000 or less, set the first field to 10 or -10, respectively.
[Viewfinder Setup] > [Eye Sensor]: When this setting is set to [On], the viewfinder will turn on automatically
when it detects the user's eye near the eyepiece (as long as it is selected as a monitoring device). To keep the
viewfinder permanently on (when it is selected as a monitoring device), set [Eye Sensor] to [Off].
[Panel Luminance]: Selects the brightness of the rear panel out of 5 available levels.
[Custom Display] (
the playback screen.
[Audio Level]: Displays the audio level meter (clip playback screen only).
[Date/Time]: Displays the date and time when the clip/photo was recorded.
[Camera Data]: Displays the shutter speed, aperture value and ISO speed/gain (clip playback screen only).
[ Assistance Functions] menu
Menu item
[Focus Guide]
[Peaking] [Activate]
[Display on LCD]
[Display on VF]
[Output to MON. & HDMI]
[Select]
[Peaking 1]
[Peaking 2]
[Focus Assistance B&W]
[Zebra] [Activate]
[Display on LCD]
[Display on VF]
[Output to MON. & HDMI]
[Select]
[Zebra 1 Level]
[Zebra 2 Level]
[Magnification] [Display on LCD]
[Display on VF]
[Output to MON. & HDMI]
[Focus Assistance B&W]
mode only): These settings determine whether certain onscreen displays will appear on
Submenu
[On], [Off]
[On], [Off]
[On], [Off]
[On], [Off]
[On], [Off]
[Peaking 1], [Peaking 2]
[Color] [White], [Red], [Yellow], [Blue]
[Gain] [Off], 1 to 15 (8)
[Frequency] 1 to 4 (2)
[Color] [White], [Red], [Yellow], [Blue]
[Gain] [Off], 1 to 15 (15)
[Frequency] 1 to 4 (1)
[On], [Off]
[On], [Off]
[On], [Off]
[On], [Off]
[On], [Off]
[Zebra 1], [Zebra 2], [Zebra 1&2]
[70 ±5%], [75 ±5%], [80 ±5%], [85 ±5%], [90 ±5%], [95 ±5%]
[70%], [75%], [80%], [85%], [90%], [95%], [100%]
[On], [Off]
[On], [Off]
[On], [Off]
[On], [Off]
Setting options
Menu Options
187
A
79
79
87
79