Reference Video Signal Output; Time Code Signal Output - Canon EOS C300 Mark II Instruction Manual

Reference Video Signal Output

You can output the camera's video signal as a reference sync signal (tri-level HD signal) to synchronize an
external device to this camera. The reference video signal output will have the same frequency as the signal
output from the REC OUT terminal.
Operating modes:
1 Open the GENLOCK/SYNC OUT terminal's [Select] submenu.
[¢ Picture/Terminals Setup] > [GENLOCK/SYNC OUT Term.] >
[Select]
2 Select [HD Sync Output] and then press SET.
• If necessary, change the scan mode (P or PsF) with the [¢ Picture/
Terminals Setup] [GENLOCK/SYNC OUT Term.]
>
Mode] setting.
Synchronization signals
Video output from the REC OUT terminal
Resolution
4096x2160
3840x2160
2048x1080
1920x1080
2048x1080
1920x1080
* When the camera is set to slow & fast motion recording mode ([Slow & Fast Motion]) and the shooting frame rate is set to 1 to 30
(fps), the signal output will be 1080/30.00 (P/PsF); when the shooting frame rate is set to 31 to 60 (fps), it will be 1080/60.00i.
When the camera is set to slow & fast motion recording in crop mode ([Slow & Fast Motion (crop)]), the signal output will always
be 1080/60.00i.

Time Code Signal Output

The time code will be output from the TIME CODE terminal as a SMPTE-standard LTC timing signal. The user bit
will also be output. Additionally, the time code will be output from the MON. terminal, REC OUT terminal, and, if
you set [3 Recording/Media Setup] > [HDMI Time Code] to [On], also from the HDMI OUT terminal (except
during interval recording, frame recording or slow & fast motion recording).
Before connecting the external device, set [¢ Picture/Terminals Setup] > [Time Code] > [TC In/Out] to [Out]
to change the TIME CODE terminal's function to output (A 93).
Operating modes:
>
Signal output from the SYNC OUT
terminal (tri-level HD signal)
Frame rate
29.97P
25.00P
24.00P
23.98P
59.94i / 59.94P
50.00i / 50.00P
Synchronizing with an External Device
[¢ Picture/Terminals Setup]
[GENLOCK/SYNC OUT Term.]
[SYNC Scan
1080/29.97 (P/PsF)
1080/25.00 (P/PsF)
1080/24.00 (P/PsF)*
1080/23.98 (P/PsF)
1080/59.94i
1080/50.00i
[Select]
[Genlock Input]
95