Originals; Placing The Original; Placing Originals In The Automatic Document Feeder - Sharp MXC301W Operation Manual

ORIGINALS

This section explains how to place originals in the automatic document feeder and on the document glass.

PLACING THE ORIGINAL

PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT
FEEDER
This section explains how to place originals in the automatic document feeder.
Allowed original sizes
Minimum original size
Standard sizes
5-1/2" (height) x 8-1/2" (width)
A5: 148 mm (height) x 210 mm (width)
Non-standard sizes
(Minimum size that can be specified manually)
5-1/2" (height) x 5-1/2" (width)
140 mm (height) x 140 mm (width)
Business card
2-1/64" (height) x 3-33/64" (width) to 2-11/64" (height) x 3-19/32" (width)
51 mm (height) x 89 mm (width) to 55 mm (height) x 91 mm (width)
When the original is a non-standard size, see the appropriate explanation below for the mode you are using.
☞
2. COPIER "SPECIFYING THE ORIGINAL
☞
4. FACSIMILE "IMAGE
☞
5. SCANNER / INTERNET FAX
Allowed original weights
1
SIZE" (page 2-28)
SETTINGS" (page 4-43)
"IMAGE SETTINGS" (page 5-53)
2
: 15 lbs. to 28 lbs. (50 g/m to 105 g/m
BEFORE USING THE MACHINE
Maximum original size
Standard sizes
8-1/2" (height) x 14" (width)
A4: 210 mm (height) x 297 mm (width)
Non-standard sizes
(Maximum size that can be specified manually)
Copy mode: 8-1/2" (height) x 14" (width)
216 mm (height) x 356 mm (width)
Image send mode: 8-1/2" (height) x 19-5/8" (width)
216 mm (height) x 500 mm (width)
2
)
Make sure an original does not remain
on the document glass.
Open the automatic document feeder, make sure that an
original is not on the document glass, and then gently close the
automatic document feeder.
1-39
Contents