Sharp MXC301W Operation Manual page 89

5
6
Procedure of "REPLACING THE TONER COLLECTION
7
push the toner collection container into the machine.
Repeat step 4 to clean all holes in the
laser unit (4 holes).
There are a total of 4 places to be cleaned in the laser unit,
including the hole cleaned in step 4. Clean all holes.
Cover
Replace the cleaning tool.
(1) Rotate the cleaning tool after putting it on
(2) Place the right-hand side of the cleaning
(3) Hook the cleaning tool to the claw.
1-48
BEFORE USING THE MACHINE
the boss and hook its edge (the side that
does not have a handle) to the claw on the
left side. Hook the cleaning tool with the
clean side face up.
tool on the inner side, spread across the top
of the claw.
CONTAINER" (page 1-52),
Contents