Automatic Reduction Of The Transmitted Image - Sharp MXC301W Operation Manual

To fax thick originals or pages of a book, use the document glass.
☞
USING THE DOCUMENT GLASS FOR TRANSMISSION
1 1
When the document glass is being used for a transmission, Quick Online transmission will not operate.
If you wish to send a fax ahead of other previously reserved fax
transmissions, use direct transmission mode.
The original is transmitted directly to the receiving fax machine without being scanned into memory.
When direct transmission mode is used, transmission will begin as soon as the transmission in progress is completed
(ahead of any previously reserved transmissions).
To send a fax by direct transmission, touch the [Direct TX] key in the base screen.
☞
USING THE AUTOMATIC DOCUMENT FEEDER TO SEND A FAX IN DIRECT TRANSMISSION MODE
☞
USING THE DOCUMENT GLASS TO SEND A FAX IN DIRECT TRANSMISSION MODE
• When transmission in direct transmission mode ends, the mode automatically changes back to memory transmission
mode.
• When the document glass is used, multiple original pages cannot be scanned.
AUTOMATIC REDUCTION OF THE TRANSMITTED
IMAGE
If the width of the transmitted image is larger than the width of the paper in the receiving machine, the image will be
automatically reduced to fit the receiving machine's paper width.
System Settings (Administrator): Auto Reduction Sending Setting
The factory default setting is automatic reduction enabled. If this setting is disabled, the image will be sent at full size and part
of the image may be cut off.
(page 4-32)
Transmission
Scan
Address Book
Direct TX
Sub Address
Address Review
4-26
FACSIMILE
1
(page 4-30)
(page 4-34)
Transmission
Contents