WITH THE SIDE STAND RETRACTED,
THE ENGINE MAY BE STARTED WITH
THE GEARBOX IN NEUTRAL OR WITH
GEAR ENGAGED AND THE CLUTCH
LEVER PRESSED.
•
Get onto the bike in the riding
position.
•
Make sure the stand has been
completely retracted and that
the engine stop button is in po-
sition (B).
•
Make sure the light switch (1) is
set to the low beam light posi-
tion.
•
Turn the key (2) and set the ig-
nition switch to ON.
03_06
At this stage:
•
The multifunction display shows
the ignition screen for two sec-
onds.
•
On the instrument panel, all
warning lights (3) and the back-
lighting come on for two sec-
onds.
•
The rpm dial (4) sweeps to the
end of the scale and returns to
03_07
the minimum value after three
seconds.
MET DE LATERALE STANDAARD
OMHOOG, IS HET MOGELIJK OM DE
MOTOR TE STARTEN MET DE VER-
SNELLINGSBAK IN VRIJ OF WAN-
NEER ER GESCHAKELD IS EN WAN-
NEER DE KOPPELINGSHENDEL GE-
ACTIVEERD IS.
•
Ga op het voertuig zitten in de
rijpositie.
•
Controleer of de standaard com-
pleet is ingeklapt en of de stop-
knop van de motor zich in positie
(B) bevindt.
•
Controleer of de schakelaar van
de lichten (1) zich in de positie
van de dimlichten bevindt.
•
Draai de sleutel (2) en plaats de
ontstekingsschakelaar op 'ON'.
Op dit moment gebeurt het volgende:
•
Op het multifunctionele display
verschijnt het beeldscherm van
de start voor 2 seconden.
•
Op het dashboard lichten alle
controlelampen (3) en de retro-
verlichting op voor 2 seconden.
•
De wijzer van de toerenteller (4)
gaat naar het schaalminimum,
en na 3 seconden keert hij terug
naar de minimum waarde.
•
Tijdens het normale gebruik van
het voertuig wordt op de instru-
menten de huidige waarde on-
middellijk getoond.
57