Infinova VH110-A2 Series Instruction Manual

Hd 2mp low light ip camera

Advertisement

Quick Links

VH110-A2 Series
HD 2MP Low Light IP Camera
INSTRUCTION MANUAL
Read this manual carefully before installation. This manual
should be saved for future use.
Important Safety Instructions and Warnings:
Electronic devices must be kept away from water, fire or high magnetic
radiation.
Clean with a dry cloth.
Provide adequate ventilation.
Unplug the power supply when the device is not to be used for an extended
period of time.
Only use components and parts recommended by manufacturer.
Position power source and related wires to assure to be kept away from
ground and entrance.
Refer to qualified personnel for all service matters.
Save product packaging to ensure availability of proper shipping containers
for future transportation.
Indicate that the un-insulated components within the product may carry a
voltage harmful to humans.
Indicate operations that should be conducted in strict compliance with
instructions and guidelines contained in this manual.
Warning: To avoid risk of fire and electric shock, keep the product away
from rain and moisture!
Notice
Copyright Statement
This manual may not be reproduced in any form or by any means to create any
derivative such as translation, transformation, or adaptation without the prior
written permission of Infinova.
Infinova reserves the right to change this manual and the specifications without
prior notice. The most recent product specifications and user documentation for
all Infinova products are available on our web site www.infinova.com.
Trademarks
Infinova
®
is a trademark of Infinova.
All other trademarks that may appear belong to their respective proprietors.
FCC Warning
The VH110-A2 series HD 2MP low light IP cameras comply with the FCC
rules.
Operation is subject to the following two conditions:
This device will not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operations.
The VH110-A2 series HD 2MP low light IP cameras have been tested and
found to comply with the limits for a Class A digital device, pursuant to the
FCC rules. With these rules and regulations being obeyed to maintain the good
working condition of device, the operation is not supposed to be affected by the
external
interruptions
under
electromagnetic, so all the installation and application processing along the
device has to follow strictly to the manual or it may hamper
telecommunications around. Meanwhile, there is no guarantee that interference
will not occur in a certain particular installation situation.
CONTENTS
Chapter I System Introduction .......................................................................... 1
1.1 Product Description .................................................................................... 1
1.2 Product Features ......................................................................................... 1
1.3 System Requirement................................................................................... 2
1.4 Product Model ............................................................................................ 3
1.5 Specifications ............................................................................................. 3
1.6 Notice ......................................................................................................... 5
Chapter II Installation and PORT INTRODUCTION ................................... 6
2.1 Installation Precautions .............................................................................. 6
2.2 Back Panel and Control Parts ..................................................................... 6
2.3 Dimensions ................................................................................................. 7
2.4 Installation of Camera ................................................................................ 8
Chapter III IE Browser Settings ...................................................................... 10
3.1 Equipment Connection ............................................................................. 10
3.2 Software Installation ................................................................................. 10
Chapter IV Basic Function Operation ............................................................ 13
4.1 Live View ................................................................................................. 13
4.2 System ...................................................................................................... 17
4.3 Network Settings ...................................................................................... 22
4.4 Camera Settings ........................................................................................ 29
4.5 Audio & Video Settings ............................................................................ 34
4.6 PTZ Functions .......................................................................................... 44
4.7 Alarm Settings .......................................................................................... 45
4.8 Record Management ................................................................................. 46
4.9 Account Settings ....................................................................................... 50
4.10 System Log ............................................................................................. 53
Appendix I Magnetic Ring Filter Instruction ................................................. 54
Appendix II Questions & Solutions ................................................................. 55
Surge Protection ................................................................................................ 56
certain
circumstances.
This
device
is

Advertisement

Table of Contents
loading

Summary of Contents for Infinova VH110-A2 Series

  • Page 1: Table Of Contents

    Infinova. All other trademarks that may appear belong to their respective proprietors. FCC Warning The VH110-A2 series HD 2MP low light IP cameras comply with the FCC rules. Operation is subject to the following two conditions: This device will not cause harmful interference.
  • Page 2: Chapter I System Introduction

    With analog video debugging interface  The VH110-A2 series HD 2MP low light IP cameras are widely used in communications, governments, schools, factories, garages, warehouses and 1.3 System Requirement other occasions with low light condition and needing high-resolution image Configuration of the computer to display image and control the camera: quality.
  • Page 3: Notice

    CHAPTER II INSTALLATION AND PORT INTRODUCTION 1.6 Notice 1. Firstly perform network settings after login. The gateway IP address should 2.1 Installation Precautions be set as that of the connected to the network camera. Do not drop the camera or subject it to strong knock. ...
  • Page 4: Chapter Iii Ie Browser Settings

     3.1 Equipment Connection firmly using a mounting hole provided on the mounting bracket to prevent The VH110-A2 series HD 2MP low light IP cameras can be directly connected fall. to a computer, or connected to a network. As a failsafe against falling, attach the unit by chain, wire cable or other ...
  • Page 5: Chapter Iv Basic Function Operation

    The login interface is displayed as shown in figure below in English operating Figure 4-2 Live View system. VH110-A2 series HD 2MP low light IP camera supports H.264 and M-JPEG video compression formats. After successful login, it enters H.264 major stream live video interface.
  • Page 6: System

    Time Zone Settings Software Update Time Zone: Select the desired time zone in the scroll box, and then click “Save” Free software update is provided for VH110-A2 series camera, and this update to save it. service can reduce system maintenance budget.
  • Page 7: Network Settings

    4.3.2 FTP Settings Figure 4-12 FTP Settings VH110-A2 series camera has the function of alarm associated with FTP upload (alarm triggered image snapshot). Configure server IP, user name and password in the FTP settings and activate FTP handling way in alarm settings, then alarm triggered images FTP upload can be achieved.
  • Page 8 Authentication: Enable or disable authentication function. This function VH110-A2 series camera supports 802.1X protocol. You have to enable 802.1X  should be set according to authentication requirements of mail server. authentication when needed. Then, select an EAP method and enter the user User name: Sender’s name, it can be set according user’s needs.
  • Page 9: Camera Settings

    4.3.10 UPnP Settings Create mapping between private network and the Internet via UPNP protocol. Select UpnP option and enter the configuration page. The added mapping list appears on the page. Figure 4-20 UPnP Settings In “Operation” column, means to delete; means to edit user information.
  • Page 10: Audio & Video Settings

    Resolution: For H.264 major stream, the resolution of VH110-A2 series comes up to Bit Rate: You have to set the upper limit of bit rate if “vbr” is selected; the 1920×1080, with 1280×960 and 1280×720 optional;...
  • Page 11 To cancel a motion detection area, just cancel the box ticking. 4.5.4Privacy Mask VH110-A2 series camera supports 4 privacy masks. If there is certain location within the surveillance area where operators are not allowed to see, and thus, Privacy Mask can be applied. System covers and shields the sensitive area via Privacy Mask setting, to avoid operators observing certain sensitive locations on monitor.
  • Page 12: Ptz Functions

    4.5.5 ROI cancelled. The camera supports four ROI encoding areas. 图 4-32 Region 1 settings Figure 4-31 ROI Settings ROI settings method: Tick off the serial number of the region for setting and click the button “Drag Box”. Then press the left button of the mouse on the video picture and drag it until a blue-line box appears.
  • Page 13: Alarm Settings

    Alarm Schedule VH110-A2 series camera can set the effective alarm schedule. Select the alarm period (if Sunday is selected, alarm will be enabled during the set period of each Sunday; if every day is selected, alarm will be enabled during the set Figure 4-37 Alarm Settings period of everyday), and then, set the time period.
  • Page 14: Account Settings

    Replay: to replay a video, double click a file in the list with the mouse or select a file and then press the “Play” button . During playing, click pause or stop playing. Click the button on the right of video window, the right window will disappear, show as below: Figure 4-42 Downloading Videos Save to: Set the path to save the downloaded files.
  • Page 15: System Log

    To reduce electromagnetic interference that power supply generates, it is Click the “Log” option tab, the date, time and log information will appear on necessary to install a magnetic ring filter with the power cable of Infinova the right of the screen.
  • Page 16  The system should perform equipotential grounding by streaming, shielding, clamping and earthing. Infinova The grounding device must meet anti-interference and electric safety requirements. There should be no short-circuiting or hybrid junction between the device and the strong grid. Make sure there’s a reliable 51 Stouts Lane, grounding system, with grounding resistance below 4Ω...

Table of Contents