Table of Contents
Advertisement
V1700 Series
Super Domes
Operation/Programming Manual
This manual addresses operation and programming of Infinova V1700 series super domes. The domes stand out for
their state-of-the-art precision technologies and provide a highly reliable and cost-effective solution to various
applications.
This manual applies to the following models: V1723, V1743, V1725, V1745, V1726, V1746, V1727, V1747, V1728,
V1748, V1729 and V1749. V1723, V1725, V1726, V1727, V1728 and V1729 are indoor Super Domes; while V1743,
V1745, V1746, V1747, V1748 and V1749 are outdoor Super Domes. The model V1725/V1745, V1726/V1746,
V1727/V1747, V1728/V1748, V1729/V1749 and V1723/V1743 have optical zoom 18X, 22X, 23X, 26X, 35X and 36X
respectively. To distinguish these six series, the convention used in this manual is [For 18X Super Dome only], [For
22X Super Dome only], [For 23X Super Dome only], [For 26X Super Dome only], [For 35X Super Dome only] and
[For 36X Super Dome only].
Please familiarize yourself with the instructions and guidelines discussed in this manual before attempting to operate
and program your super domes.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Infinova V1723
Summary of Contents for Infinova V1723
- Page 1 This manual applies to the following models: V1723, V1743, V1725, V1745, V1726, V1746, V1727, V1747, V1728, V1748, V1729 and V1749. V1723, V1725, V1726, V1727, V1728 and V1729 are indoor Super Domes; while V1743, V1745, V1746, V1747, V1748 and V1749 are outdoor Super Domes. The model V1725/V1745, V1726/V1746, V1727/V1747, V1728/V1748, V1729/V1749 and V1723/V1743 have optical zoom 18X, 22X, 23X, 26X, 35X and 36X respectively.
-
Page 3: Copyright Statement
This manual may not be reproduced in any form or by any means to create any derivative such as translation, transformation, or adaptation without the prior written permission of Infinova. Infinova reserves the right to change this manual and the specifications without prior notice. The most recent product specifications and user documentation for all Infinova products are available on our website www.infinova.com. - Page 4 Read this manual carefully before installation. This manual should be saved for future use. Important Safety Instructions and Warnings Electronic devices must be kept away from water, fire or high magnetic radiation. Clean with a dry cloth. Provide adequate ventilation. Unplug the power supply when the device is not to be used for an extended period of time.
-
Page 5: Table Of Contents
Table of Contents Chapter I Product Description..........1 Chapter IV Menu Programming ..........7 Chapter II System Feature............1 4.1 Menu Navigation and Operation ..........7 2.1 High-Performance Image ............1 4.2 Main Menu ................7 2.2 Outstanding A.I. Camera............1 4.3 Camera Information ............... -
Page 7: Chapter I Product Description
Chapter I Product Description Chapter II System Feature 2.1 High-Performance Image With its super domes series, Infinova offers a line of cost-effective and highly reliable security cameras that represent the peak of The Super Domes utilize the newly developed 1/4” CCD that CCTV surveillance/security technology. -
Page 8: Area Partition And Privacy Mask
position"). This allows the domes to keep an "eye" on a key area Chapter III Dome Operation even if an operator has carelessly pointed it at an insignificant Before attempting to power on and operate the domes, please make position. sure that the domes have been properly installed and the DIP When a tilt operation exceeds the straight down position, e.g., switches have been correctly set. -
Page 9: Setting And Calling Up A Preset
To set a preset view Operations Instructions 1. Place the key switch at the PROGRAM position; Camera NOTE: The dome cameras must be called up OPERATE Call-up (put under the control of) via the keyboard PROGRAM before operation or programming. MENU To call up a camera, enter the camera ID 2. -
Page 10: Setting And Calling Up A Pattern
10. Repeat step 3 to finish the course. Enter "73, SHOT" or “4 PATRN” to save Pattern 4; Under INFINOVA, PELCO-D/P, Up the Coax protocols, dome 11. Place the key switch at the OPERATE position; could define and store 4 independent patterns. -
Page 11: Setting And Calling Up A Autopan
1. The joystick to move the camera to the position that is desired as the start point; Below is the way to program and call up autopan under INFINOVA, PELCO-D/P protocols: To define the start point 2. Place the key switch at the PROGRAM position. - Page 12 3. Enter code commands "66, SHOT" to set the current position as SHOT the start point. 4. The following overlay messages will be displayed, indicating the SHOT start point has been defined, and the system is ready for setting 4. The following overlay messages will be displayed, indicating the the other boundary.
-
Page 13: Special Operations
Place the key switch at the OPERATE position. must be defined via these menus. Under INFINOVA, Up the Coax protocols, enter “33, SHOT” or “65, SHOT” to recall 180 flip automatically. 4.1 Menu Navigation and Operation Under PELCO-D/P protocol, enter “33, SHOT”... - Page 14 3. SET AE MODE Set digital slow shutter. [Except for 18X super domes with FCB-EX45CP camera] Set shutter speed. PASSWORD: ****** Select exposure mode. Define B/W mode. [For 23X/26X/35X/36X super domes] B/W change. [For 23X/26X/35X/36X super domes] Follow these steps to enter system access password: Pro-B/W [For 23X/35X super domes] 1.
-
Page 15: Camera Information
9. AREA SET Function: Input the same password as the “PASSWORD SET” Set serial number for 16 areas entry to confirm a new password. Define title for 16 areas Operation:Follow the steps described in “PASSWORD SET” to Area display switch input the confirming password. -
Page 16: Setting Ae (Automatic Exposure) Mode
enable/disable digital zoom function. The default is OFF.) also manually adjust the white balance parameters to achieve what they consider to be the best-balanced ZOOM SPEED pictures. Function: Determine the zooming speed of the camera, i.e., how Options: AUTO - (default) enable the camera to automatically fast the camera will go from its full wide zoom to its make white balance. - Page 17 For 18X SET AE MODE AUTO SHUTTER : EXPOSURE : AUTO MIRROR : RETURN For 22X For 35X CAM FUNCTION SET AE MODE AE-DSS : AUTO SHUTTER : AUTO AGC LEVEL : EXPOSURE : AUTO OFF (only for 22X with 274 camera ) MIRROR : STABILIZE : FREEZE :...
- Page 18 is as follows: white/color conversion. 1/60, 1/90,1/100,1/125, 1/180, 1/250, 1/350,1/500,1/725,1/1000, Options: day, norm (default), night 1/1500,1/2000,1/3000, 1/4000, 1/6000, 1/10000 As illumination decreases, a setting of “day” will cause a hard conversion from color to B/W, while a setting of [For 26X/36X Super Domes] “night”...
-
Page 19: Osd (On-Screen Display) Setup
Function: Stabilize function could proof the image shaking when [For 35X Super Domes] the domes’re operating on the acceleration or abrupt (default) turn off the image wide dynamic range halting condition. Please note that if CAM FUNCTION function of the camera. is ON, Digital Zoom will be affected, and the digital MD1 –WDR image processing mode 1 zoom can reach 64 at the most. - Page 20 patterns, areas and AUTOPAN. AUTOPAN TITLE DISP Move the cursor to CLEAR TITLE and deflect the Function: Enable/disable the on-screen title information for a joystick rightward, the following information will be running AUTOPAN or not. displayed. Options: OFF - (default) turn off the on-screen display for AUTOPAN.
- Page 21 Enter PRIVACY MASK MODE 1, the following information will Options: 001~008 for 22X/23X/35X domes; 001~024 optional be displayed: for 18X/26X/36X domes. PRIVACY MASK: MASK STATUS AREA MASK: 1 OFF 2 OFF 3 OFF 4 OFF 5 OFF 6 OFF Function: Turn on/off Privacy Mask function. 7 OFF 8 OFF 9 OFF...
-
Page 22: Home Position
sure that it has been properly set. For 18X domes with FCB-EX45CP camera and 26X/36X domes RETURN TIME PRIVACY MASK: Function: Determine how long before the inactive dome returns to MASK COLOR: MASK NO: its home position. MASK STATUS: MASK H WIDTH: Options: 000 ~ 010min (Step by 1) set the return time MASK V WIDTH: 010min ~ 001hour (Step by 10) set the return time... -
Page 23: Autopan
3. Move the cursor to the ACT entry for the next alarm input in use; INPUT NO. INPUT ACTION RELAY 4. Repeat Steps 1 through 3 until all the desired entries have been PRESET 01 PRESET 001 R001 PRESET 02 PRESET 022 R001 defined. -
Page 24: Pattern
right. SET CAMERA ID PATTERN NO : LEFT: Start pointing that camera aims at and runs to the left. PATTERN 001 TITLE : CAMERA SETUP DISPLAY : SET AE MODE OSD SETUP RETURN CONFIG HOME POSITION SPEED ALARM ACTION AND STATE AUTOPAN SET Functions: Select the scanning speed. - Page 25 a contiguous 360-degree view around the domes, with the ending DISPLAY point of one area as the starting point for the next. Please note that Function: Enable/disable the on-screen title description for the the ending point of the last area cannot surpass the starting point of selected area.
-
Page 26: Default Set
SHOT 3. Move the camera to the right until the ending boundary of the area is displayed. AREA NO : 005 Gate 10 4. Enter code commands "2, SHOT" to set the current position as 4.12 Default Set the ending boundary for this area. This position is also the The DEFAULT SET item in the main menu is generally used to starting boundary for the next area. -
Page 27: Chapter V Operations Under Different Protocols
Chapter . CAMERA CALL-UP, PAN/TILT, TELE /WIDE, OPEN/CLOSE, FAR/NEAR), please refer to users’ manuals of INFINOVA The following tables show the operation code via Infinova V2117 keyboard system. system keyboard under different protocols. - Page 28 Commands Key Lock Function 92 + SHOT OPERATE Set Autopan 93 + SHOT OPERATE Save Autopan 98+ SHOT OPERATE Call Autopan 65 SHOT PROGRAM PROGRAM Enter menu 95 SHOT OPERATE 33 65 + SHOT OPERATE Call flip 180° 34 + SHOT OPERATE Call home position 99 + SHOT...
- Page 29 V2011/V2015 +V2414+Up the Coax dome PORTOCOL Up the Coax DATALINE PELCO D PELCO P Infinova convert Manchester convert to convert to convert to convert to FUNCTION Up the Coax Up the Coax Up the Coax Up the Coax...
- Page 30 The following table shows the operation procedures of function setting under PELCO P/D, take CM6800 (matrix switcher)+KBD200 (keyboard) of PELCO for example. CM6800+KBD200 Enter 95 and then press “PRESET” key to access menu of the domes. Access Menu of the Dome Use the direction keys to position the cursor and select a parameter.
-
Page 31: Appendix I Specifications
Programmable presets (Pelco P/D) 128 at most Programmable presets (Infinova “I”) 127 at most Programmable presets (Up the Coax) 127 at most Programmable patterns (Infinova “I”/ PelcoP/D/ Up the Coax) Programmable areas Alarm inputs Relay output Home position Auto pan... - Page 32 Technical Specification of the Cameras. Optic Zoom PAL/NTSC PAL/NTSC PAL/NTSC PAL/NTSC PAL/NTSC Video Type PAL/NTSC (Color) (Color) (Color, B/W) (Color, B/W) (Color, B/W) (Color, B/W) Scanning System 2:1 Interlace Scanning 1/4" Interlace 1/4" Progressive 1/4" Interlace 1/4" Progressive 1/4" Interlace Image Sensor Scanning CCD Scanning CCD...
-
Page 33: Appendix Ii Troubleshooting
Appendix II Troubleshooting The following table describes the symptoms causes, and solutions for the problems. Symptoms Possible Causes Solutions Unit does not perform Wrong power connection Reconnect power cable initiation sequence after Power supply failure Repair or replace power supply powering on Power PCB fuse damage Replace the fuse... - Page 34 Infinova 51 Stouts Lane, Monmouth Junction, NJ 08852, U.S.A. Tel: 1-888-685-2002 (USA only) 1-732-355-9100 Fax: 1-732-355-9101 sales@infinova.com V2.6 0906...
Need help?
Do you have a question about the V1723 and is the answer not in the manual?
Questions and answers