Fan - HP EliteBook 660 G11 Maintenance And Service Manual

4. Remove the speakers (4) from the computer.
NOTE:
The absence of or damage to these isolators can result in degraded speaker performance.
To replace the speakers, reverse the removal procedures.

Fan

To remove the fan, use these procedures and illustrations.
Table 6-3 Fan descriptions and part numbers
Description
Fan (includes cable)
For use only on computer models equipped with a graphics subsystem with discrete memory and
computer models equipped with a graphics subsystem with UMA memory and a 28 W processor
For use only on computer models equipped with a graphics subsystem with UMA memory and a 15
W processor
Before removing the fan, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the fan:
1. Disconnect the fan cable (1) from the system board.
2. Release the display tuner cable from the retention clips (2) that are built into the fan.
3. Remove the three Phillips M2.0 × 4.0 screws (3) that secure the fan to the system board.
When removing the speakers, make note of the location of the rubber isolator locations (5).
Bottom cover on page
Preparation for disassembly on page
42).
Battery on page
Spare part number
N96442-001
N96441-001
54).
54).
Fan 57