Sharp MX-5500N Installation Manual page 66

I. Punch position label attachment
1) Attach the punch position label to the position indicated in the
figure.
[For scanner] (Package part No. 11 of MX-FNX3 or MX-FNX4)
Lose the clearance.
Second label
First label
Edge of R part in corner
Reference line of
Edge of R part in corner
sticking label on.
* The corner of the upper
cabinet rear part
[For DSPF] (Package part No. 12 of MX-FNX3 or MX-FNX4)
Tangential line
of R2.5
edge R2.5
MX-7000N MX-PNX2A/B/C/D 6 – 6
J. Turn ON the main power switch of the main
unit
1) Connect the power plug of the main unit into the power outlet.
2) Open the front cabinet of the main unit. Turn ON the power
switch in the front cabinet.
3) Turn ON the power switch on the operation panel.
"ON"
ON
ON