Sharp MX-5500N Installation Manual page 62

C. Check the packed items
1) Check that all the items are included in the package.
1 2
4 5
7
P
No. Names of bundles
1 P tight M4x12
2 Step screw A
3 Cap screw M3x6
4 Binding head M4x12
5 Front cover
6 Front cover mounting fixture
7 Connection fixture F (for punch)
8 Connection fixture R (for punch)
9 Washer (For MX-FNX4 only)
2. Installation
<Note before installation>
* Before installing the MX-PNX2, unpack the MX-FNX3 or MX-
FNX4.
A. Installation of punch unit
* Carry out the procedure 1) only for MX-FNX4.
1) Peel off the released paper of the washer (Package part No.
9), and stick it to the finisher.
3
6
8 9
P
MX-FNX4
only
Quantity
1
2
3
4
1
1
1
1
1
MX-7000N MX-PNX2A/B/C/D 6 – 2
2) Attach the step screw A (Package part No. 2) to the finisher.
3) Remove the fixing screw, and remove the connector cover on
rear side of the finisher.
4) Hang the punch unit on the step screws installed to the fin-
isher.
2
5) Tighten the step screws bundled to the punch unit, fix the
punch unit.
1