Sharp MX-5500N Installation Manual page 34

6) Remove the fixing screws (3 pcs.) of the paper feed table of
the LCC, and remove the cautionary note A.
Note: When the power is turned on without removing the fixing
screw, remove the fixing screw and execute SIM 15.
7) Push the large capacity tray slowly into the original position.
C. Check the packed items
1) Check that all the items are included in the package.
A
No.
1 Mounting plate upper
2 Connecting plate lower front
3 Connecting plate lower rear
4 Positioning plate
5 Left front cabinet
6 Fixing screw A (S-tight, M4 x 18)
7 Fixing screw B (Hexagon with seat, S-tight, M4 x 12)
8 Fixing screw C (Binding head S tight M4x8)
2. Installation
<Note before installation>
* Start installation after checking that the LINE indicator and the
DATA indicator below it on the operation panel are neither lit nor
blinking.
A. Turn OFF the power of the main unit.
1) Turn OFF the power switch on the operation panel.
MX-7000N MX-LCX3 3 – 2
2
1
5
6
7 8
Names of bundles
"OFF"
3
4
Quantity
2
1
1
2
1
4
6
1
"OFF"