Sharp MX-5500N Installation Manual page 65

3) Fix the main unit and the punch unit with the fixing screw
(Package part No. 4 of MX-FNX3 or MX-FNX4).
4) Close the front door of punch unit.
5) Install the fixing screw (Package part No. 4 of MX-FNX3 or
MX-FNX4) on rear side.
6) Install the rear cover of punch unit with the fixing screws.
7) By using nippers, split the removed connector cover of the fin-
isher along the perforated line.
8) Install the connector cover of the finisher and fix it with the fix-
ing screw.
H. Connection of connector to the main unit
1) Connect two connectors of the finisher to the main unit, and
tighten the screws.
MX-7000N MX-PNX2A/B/C/D 6 – 5