Slim Optical Drive Bezel Blank - HP ProDesk 400 G2.5 Maintenance And Service Manual

Slim optical drive bezel blank

On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch external drive bays that need to
be removed before installing a drive. To remove a bezel blank:
1. Remove the access panel
2. Remove the front bezel
3. To remove a slim optical drive bezel blank, press inward on the two retaining tabs (1) and pull the blank
off the front bezel (2).
(Access panel on page
(Front bezel on page 20).
19).
Slim optical drive bezel blank 21