Slim Optical Drive Bezel Blank - HP 280 G2 Maintenance And Service Manual

Slim optical drive bezel blank

On some models, there is a bezel blank covering the slim optical drive bay. Remove the bezel blank before
installing an optical drive. To remove the bezel blank:
1. Remove the access panel
2. Remove the front bezel
3. To remove the bezel blank, press upward on the bottom tab and press downward on the top tab on the
side of the blank (1), and then rotate the blank off the front of the bezel (2).
(Access panel on page
(Front bezel on page 19)
18)
Slim optical drive bezel blank 21