Slim Optical Drive Bezel Blank - HP EliteDesk 800 G5 SFF Maintenance And Service Manual

Slim optical drive bezel blank

On some models, a bezel blank covers the slim optical drive bay. Remove the bezel blank before installing an
optical drive. To remove the bezel blank:
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. Press inward on the tab on the right side of the blank (1), and then rotate the blank off the front bezel
(2).
(Preparation for disassembly on page
(Access panel on page
(Front bezel on page 20).
19).
Slim optical drive bezel blank
18).
21