Slim Optical Drive Bezel Blank - HP ProDesk 400 G3 Small Form Factor Maintenance And Service Manual

Slim optical drive bezel blank

On some models, there is a bezel blank covering the slim optical drive bay that needs to be removed before
installing an optical drive. To remove a bezel blank:
1. Remove the access panel
2. Remove the front bezel
3. To remove a slim optical drive bezel blank, press inward on the two retaining tabs (1) and pull the blank
off the front bezel (2).
(Access panel on page
(Front bezel on page 18).
18).
Slim optical drive bezel blank 19