Drive Cage - HP ProDesk 400 G2.5 Maintenance And Service Manual

Small form factor
Hide thumbs Also See for ProDesk 400 G2.5:
Table of Contents

Advertisement

Drive cage

1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the optical drive
4.
Disconnect the data cable (1) and power cable (2) from the rear of the hard drive, and remove the
cables from the retainer clip (3).
5.
Press inward on the drive cage release latch (1), rotate the drive cage up (2), and then slide the tabs on
the side of the drive cage out of the chassis (3).
To install the drive cage, reverse the removal procedure.
26
Chapter 4 Removal and replacement procedures: Small Form Factor
(Preparation for disassembly on page
(Access panel on page
19).
(Removing a 9.5mm slim optical drive on page
18).
30).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents