Auto Re-Set; Central Locking; Remote Controls; Doors, Bonnet & Boot - Mongoose M33 Owner's Operation Manual

AUTOMATIC RE-SET
If the alarm is triggered, the siren will sound for 60 seconds. Once it stops, the system resets to the armed
position. It will then re-trigger on the next intrusion. (Max' 5 triggers per circuit)
CENTRAL LOCKING –
(programmable for electric or vacuum locking)
This security system has built-in relays to enable remote control of a vehicles central locking systems.
Certain vehicles may require additional extra cost parts to enable the correct use of this feature.
CODE HOPPING REMOTE CONTROLS
2 water resistant remote controls are supplied with the M33. Maximum 3 remotes can be used.
This coding system is completely random therefore eliminating the possibility of recording it (code grabbing).
DOORS, BONNET AND BOOT PROTECTION
The siren will sound and the indicators will flash for 30 seconds should any of these be opened when the system is
armed. The system is connected to the vehicles courtesy door light switches. These switches must function
correctly for the alarm system to operate. The fitting of door switches is not included with this product.
IMPACT SENSOR - 2 STAGE
The sensor is designed to detect impacts to the vehicle such as violent glass breakage. It may also be triggered
by shock waves produced from loud exhausts and heavy vehicle traffic. It should not be triggered by normal wind
or rocking motions. If the sensor receives a light impact the siren fast chirps for a few seconds as a pre-warning. It
sounds fully for 30 seconds if it detects a heavy impact.
The sensitivity level is adjustable by the installer. Over sensitivity can cause false alarms.

SHOCK SENSOR BYPASS

The shock sensor can be bypassed to prevent false alarms. Arm the system and within 5 seconds press UNLOCK
& MUTE at the same time to disable the sensor. It will be active next time the alarm is armed.
5