Table of Contents
Advertisement
M20, M20S & M24
Owner's Operation Manual
For correct operation, please read this manual to
familiarise yourself with the features.
We recommend professional installation of this security product
M20 & M20S suitable for 12volt, negative ground vehicles
M24 suitable for 24 volt, negative ground vehicles
Advertisement
Table of Contents
Related Manuals for Mongoose M20
Summary of Contents for Mongoose M20
- Page 1 Owner’s Operation Manual For correct operation, please read this manual to familiarise yourself with the features. We recommend professional installation of this security product M20 & M20S suitable for 12volt, negative ground vehicles M24 suitable for 24 volt, negative ground vehicles...
- Page 2 REMOTE SECURITY KEY – 2 supplied BUTTON ONE ONLY BUTTON TWO ONLY ‘ARM’ (& LOCK) ‘DISARM’ (& UNLOCK) PRESS FOR 1.5 SECONDS PRESS BUTTON TWO TO TO ARM THE SECURITY SYSTEM - DISARM THE ALARM SYSTEM. (DOORS WILL ALSO LOCK IF THE (DOORS WILL ALSO UNLOCK CENTRAL LOCKING HAS BEEN IF THE CENTRAL LOCKING...
-
Page 3: Table Of Contents
CONTENTS Operating your security system……. Siren sounds……..……..……. Remote control key…………………. Override / valet switch..…. Central locking……………………….. Security re-arm....….. Arming the system…………………… Ignition safety door lock..….. Engine immobiliser………………….. Code learning....….. Disarming the system………………. Defective zone bypass..…… 10 Vehicle lights on warning………….. Automatic, last door, arming………. -
Page 4: Operating Your Security System
REMOTE CONTROL KEY - 2 BUTTON Two remote control keys are supplied with the system which enable you to arm and disarm your security system. One remote control should be kept with your car keys and the other with your spare car keys in a safe place. CENTRAL LOCKING - KEYLESS ENTRY* This security system has built-in relays to control central locking systems. -
Page 5: Disarming The System
DISARMING To disarm, press remote control button two. The siren will chirp twice and the indicators will flash twice. The doors will unlock if this system has been connected to the vehicles central locking system. If the alarm is sounding, the first press stops the siren, a 2 press then disarms the system. -
Page 6: Silent Arming & Shock Sensor Bypass 6 Auto Re-Set
SILENT ARMING Press both buttons to silently arm the system without the siren chirps. Disarming is then automatically silent. AUTOMATIC RE-SET The siren will sound for 5 to 30 seconds, depending on the circuit triggered, after which it will stop and reset to the armed position. -
Page 7: Indicator Flash Confirmation / Codes
INDICATOR FLASH CONFIRMATION / CODES This is a visual indication of system status. A) 1 Flash - Armed B) 2 Flash - Disarmed CHIRP CONFIRMATION / CODES This is an audible indication of system status. A) 1 Chirp - Armed B) 2 Chirps - Disarmed C) 3 Chirps - Door, bonnet &... -
Page 8: Siren Sounds
SIREN SOUNDS A) Continuous - Door activation B) Slow intermittent - Sensor triggered C) Fast intermittent - Ignition triggered D) ‘Whoop-whoop’ – Vehicle lights are on when arming EMERGENCY OVERRIDE SWITCH - Ensure you know the location of this. At the time of installation, a push button switch was hidden under the dashboard. If the alarm fails to respond to the remote control, or you have misplaced it, you can override the alarm as follows;... -
Page 9: Code Learning
ROLLING CODE REMOTE CONTROLS The security code of your alarm system changes each time you press the remote button. This coding system is completely random therefore eliminating the possibility of recording it (code grabbing). As there are billions of code combinations the chances of duplication are literally billions to one. -
Page 10: Defective Zone Bypass
DEFECTIVE ZONE BYPASS If any door, the bonnet or boot has been left open when arming, the siren will emit a warning after a 30 second delay. The open circuit will then be bypassed. The alarm will re-arm an open circuit when it is closed. SECURITY OPTIONS ask your installer for more details DOME LIGHT SUPERVISION (Optional) -
Page 11: Testing Your Alarm
To ensure correct operation at all times, replace the battery with an 12v23a from your Mongoose dealer or electronic supply shop every 12 months. Please contact your Mongoose dealer, installer or re-seller should you have any difficulty in the use of this product. - Page 12 Installation to be carried out by suitably qualified persons. WARNING: M24 is for 24 volt vehicles only. Only use 24 volt accessories, eg: sensors, door motors, etc.
- Page 13 WIRING INFORMATION: Installation to be carried out by suitably qualified persons. MSP20 is a 12v multi-purpose siren for M20 only. Use Purple (+) trigger wire for M20. RED = +12v BLACK = ground BLUE = negative trigger PURPLE = positive trigger...
- Page 14 Warranty for the installation is borne by the original installing agent only. This will be chargeable if not returned to the original installer. Whilst every care is taken by our installers in fitting the alarm, Mongoose takes no responsibility for any damage caused to a vehicle in the installation process.
-
Page 15: Proof Of Purchase
Please complete the above details, detach from this manual and keep in a safe place. These details should be presented to your Mongoose dealer in the unlikely event that you require this product to be repaired under the terms of the ‘product warranty’. - Page 16 Mongoose (Australia) Pty Limited Sydney, Brisbane Mongoose (New Zealand) Limited Auckland For service contact your Mongoose agent;...
Need help?
Do you have a question about the M20 and is the answer not in the manual?
Questions and answers