Auto Matic Re-Set; Arm Condition Memory - Mongoose MX40 II Series Operating & Installation Instructions Manual

Hide thumbs Also See for MX40 II Series:
Table of Contents

Advertisement

SECURITY RE-ARM (& RE-LOCK)
The sy stem will automatically re-immobilise after 30 seconds if it has been disarmed by remote.
Doors will also re-lock, if connected, if no door is opened within the 30 seconds. Opening a door will
not prev ent the engine f rom being automatically immobilised – the engine must be started to prevent
this. For the security re-lock f eature to operate, the system must hav e been initially set by the remote
control.
TRIGGER & 2 STAGE DISARM
When armed, if a door is opened or the ignition is switched on the park lights will f lash for 30 seconds
(the optional siren will sound).
If the system is being triggered, press the disarm button once to cancel the lights and optional siren.
Press a second time to disarm the system.

AUTO MATIC RE-SET

After the system has been triggered, it will automatically re-set to the armed position. If the parking
lights flash 4 times upon disarming, this indicates the system has been triggered.

ARM CONDITION MEMORY

Should the vehicle battery be disconnected, the system memorises the last set position of the system.
If the system was disarmed and the engine not immobilised prior to battery disconnection,
reconnection does not immobilise the v ehicle until reset by the ignition being turned ON then OFF.
If the battery was disconnected whilst the system was armed, reconnection will return the system to
the armed state and then immediately trigger.
P ARK LIGHTS FLASHING (connection to the indicators may infringe your warranty)
The park lights flash to confirm the arming and disarming of the system. They will also f lash if the
sy stem is triggered whilst the system is armed. The park light output is f use protected to prevent the
module being shorted.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents