Arming The System; Silent Arming; Defective Zone Bypass; Disarming The System - Mongoose M33 Owner's Operation Manual

OPERATING YOUR VEHICLE SECURITY SYSTEM
ARMING (& LOCKING*)
Arm the system (and lock the doors*) by pressing button 1 on the remote control.
The indicators will flash once and the siren chirps once to indicate that the system is fully armed.
The dash mounted LED will light for 10 seconds as the security system checks vehicle integrity and then slow
flashes to indicate armed mode.

SILENT ARMING

(Can be permanently silenced through programming)
Press button 3 to silently arm the system without the siren chirps. Disarming will then be automatically silent.

DEFECTIVE ZONE BYPASS

If any door, the bonnet or boot is open before arming the alarm, the dashboard LED will stay lit as a warning. If not
closed before or after arming, the siren will emit a warning after a 30 second delay. The open circuit will then be
bypassed. The alarm will arm an open circuit when it is closed.
DISARMING (& UNLOCKING*)
– (See 2 stage unlock option page 8)
To disarm (and unlock*), press remote control button 2. Siren will chirp twice and the indicators will flash twice.
The indicators will then stay lit for 30 seconds to provide perimeter illumination.
If disarming during an alarm activation, press button 1 or 2 to cancel sounding, then button 2 to disarm.
SECURITY RE-ARM (& RE-LOCK)
- programmable
The alarm will automatically re-arm if it has been disarmed by remote but the doors have not been opened within
30 seconds. Doors also re-lock if central locking connected. LED fast flashes to signify countdown to auto re-arm.

ENGINE IMMOBILISER

This security system is equipped with an engine immobiliser to prevent engine starting when the system is armed.
4