Emergency Override; Valet Mode (Security System Disable); Automatic Arming; Automatic Door Locking - Mongoose M33 Owner's Operation Manual

EMERGENCY OVERRIDE

At the time of installation a hidden push button switch was fitted, usually under the dashboard.
If the alarm is armed and fails to respond to the remote control, or you have misplaced it, you can override the
alarm as follows;
1) Open the door with the ignition key - the alarm will trigger
2) Turn on the ignition and press the override button for 3 seconds - this will cancel the alarm and put the alarm in
valet mode – LED on constant. See below to cancel valet mode.
VALET MODE - LED PERMANENTLY LIT
When disarmed, turn the ignition on and press and hold the override switch for 3 seconds. Siren will chirp and
lights flash once to confirm. LED will stay lit to indicate valet mode. Repeat to turn the system back on.
AUTOMATIC - LAST DOOR ARMING
(Programmable)
The system can be programmed to arm automatically 30 seconds after closing the last door (or bonnet or boot).
The LED will fast flash during the auto arming countdown.
IGNITION SAFETY DOOR LOCK (Programmable)
If the central locking is connected to this security system, the doors will automatically lock after 1 second when the
engine is started (or ignition is turned on). The doors will unlock when the ignition is turned off.
If a door is left open during engine starting, the doors will not lock but cause the indicators to flash 4 times to
indicate an open door.

2 STAGE UNLOCK

– optional connection
nd
This alarm has the ability to allow you to only unlock the drivers' door when you disarm and then a 2 press of the
disarm button on the remote unlocks the passenger doors.
This feature requires the installer of this product to wire your vehicle differently, so this feature must be specified
prior to installation.
8