STEP 3: CONNECTION FOR SEAT POST AND MAIN FRAME
Unscrew 1pcs 1/2*100 screw (42), 2pcs flat washer OD22*ID13*2.0T (43), 1pcs 1/2 nylon nut (44) and 1pcs 1/2
nylon nut cover (52) which are pre-mounted on the main frame. Connect sensor line upper section (58) with
sensor line below section (59).
Insert seat post (1) into main frame (2),insert main frame pin (55) into main frame and seat post (1), lock with
1pcs 1/2*100 screw (42), 2pcs flat washer OD22*ID13*2.0T (43), 1pcs 1/2 nylon nut (44) and 1pcs 1/2 nylon
nut cover (52).
Connect seat post and main frame with connection pin (21), nut M12*1.75 (51) and flat washer
OD32*ID13.5*2.0T (63).
STEP 4: ASSEMBLY FOR PEDAL
Insert pedal axes (20) into the hole on the main frame. Insert 2pcs pedal gap washer (9), 2pcs flat washer
OD22*ID13*2.0T (43), 2pcs pedal (10-L, 10-R) into pedal axes (20), lock with 2pcs flat washer
OD22*ID8.5*2.0T (45), 2pcs M8 spring washer (46), 2pcs M8 nut (47), tight with 6MM spanner and sleeve
spanner. Put pedal belt (65) on pedal.
6