Removing The Back Panel - Dacor ER30D Technical Manual

Removing the Back Panel

• Turn off the gas supply at the gas supply
valve and power to the range at the junction
or fuse box.
• Pull the range out from the wall or cabinet.
• Remove the grates, the burner caps, burner
rings, and crown burner heads from the
cooktop.
• If the range is equipped with a 24" backguard
F , remove the eight (8) backguard bracket
hex screws G . They are accessed through
the 8 holes H on the back of the backguard.
• Remove the five (5) screws
the island trim/backguard
trays K .
• Remove the eight (8) screws on the back side
of the island trim/backguard, four (4) on each
side of the range.
S
ECTION
I on the front of
J , above the spill
8 - R
ANGE
H
G
D
ISASSEMBLY
F
J
I
K
Page 8-3