Front Door Glass Assembly - Dacor ER30D Technical Manual

Door Component Repair (continued) Door Component Repair

Front Door Glass Assembly

Front Door Glass Assembly
WARNING
• To prevent personal injury, use gloves
when handling glass components that are
broken or shattered.
• Remove the oven door. See the Door Removal
section on page 8-1.
• Lay the door, handle down, on a flat, padded
surface with the door gasket facing up.
• Remove the two (2) screws
corners of the door.
• On ER48D Only: Grasp the top end of the
door with one hand and pull up. Pull the door
handle out from underneath.
• Grasp the top of the door with both hands
and turn it over on the padded surface so that
the door gasket faces up.
• Remove the two (2) inner screws
bottom of the door. The outer screws
the bottom of the door are part of the hinge
assembly. Do not remove them.
• Grab the front door glass assembly with both
hands and remove it.
• On ER36D Only y : Remove the two (2) door
handle screw plugs
mounting screws are located below the plugs
(see facing page). Remove the two (2) door
handle screws Y
liner screws B . Assemble the door handle to
the new front door glass assembly. Replace
the plugs
(continued)
B in the top
C on the
X . The door handle
. Do not remove the door
S 9 - C
ECTION
B
D on
C
R
OMPONENT
C
D
EPAIR
B
C
Page 9-3