Display / Touch Screen; Hard Disk Drive; Memory Conflicts - Honeywell Thor VX9 User Manual

Display / Touch Screen

Problem Solution
The display is Verify the Display setting in the Microsoft Windows Control panel. The display settings should be set to
unreadable. High Color (16 bit) and 800 by 600 pixel resolution.
It may be necessary to reboot in Safe Mode to change the display settings if the screen is unreadable. See
Bypassing Microsoft Windows Startup
Touch screen Recalibrate the touch screen. Select Start > Programs > UPDD > Calibrate.
taps are
Touch screen View the UPDD settings (Start > Programs > UPDD > Settings). With Hardware selected, the screen
is not working should say:
Handling whole desktop
Connected to COM3
If this is correct, click on the Calibrate button and calibrate the touch screen.
If the hardware area is blank, add a new device. Chose "LXE, AHL serial", set desktop to "whole" and set
the serial port to "COM3". Click on the calibrate icon to complete the process. Contact your
Assistance

Hard Disk Drive

If you have problems with the hard disk drive, run the Microsoft Windows disk checking utility. This utility analyzes the direc-
tories, files and File Allocation Tables (FAT).
Right-click the Computer or Local Disk icon, then click Properties > Tools > Error checking then click the Check now
button. Contact your Technical Assistance
has problems.
For information on running the disk checking utility, refer to Help and Support on the Windows Start menu.

Memory Conflicts

Microsoft Windows controls memory management. If you experience a problem with memory management, please refer to
Help and Support on the Windows Start menu or a commercially available Windows guide. If a particular program causes
the memory error, refer to the documentation for that program.
3 - 18
(page 8-1) if the device choice does not include a listing similar to the one above.
(page 8-1) if the scandisk utility does not report any errors and the hard disk still
(page 4-19).
Technical