Wep - Honeywell Thor VX9 User Manual

WEP

To connect using WEP, make sure the following profile options are used.
1. Enter the SSID of the Access Point assigned to this profile
2. Set Auth Type to Open
3. Set WPA to None
4. Set Encryption to WEP
5. Set Authentication to None
Scroll down to enter the WEP key(s).
Valid keys are 10 hexadecimal or 5 ASCII characters (for 40-bit encryption) or 26 hexadecimal or 13 ASCII characters
(for 128-bit encryption). Enter the key(s) and click Commit.
Ensure the correct Active Profile is selected on the Configuration tab and restart. The Status tab shows the device is
connected.
5 - 18