Launching The Rs2 Wizard; Using The Rs2 Wizard; Thor Vx9 Drivers Cd-Rom - Honeywell Thor VX9 User Manual

• The location selected must be accessible via a wired Ethernet connection from the Thor VX9. An 802.11 WLAN
connection cannot be used for the RS2 process.

Launching the RS2 Wizard

1. Attach the USB DVD player to the Thor VX9. Use a standard USB port instead of the Multi-Purpose Connec-
tor Cable on the Thor VX9.
2. Insert the RS2 DVD into the USB DVD player.
3. Start the Thor VX9.
Note: The BIOS must be configured to boot from the USB DVD player. If this is not the case please modify the
boot order in the BIOS of your Thor VX9.
4. When the Thor VX9 boots, the BIOS may prompt you to press a key to continue to boot from the RS2 DVD.
Please press a key when prompted to boot from the RS2.
5. RS2 is now booted and the Wizard started.

Using the RS2 Wizard

1. The first screen of the Wizard displays licensing information. Review the information and click Next to accept
the licensing terms.
2. The second screen of the Wizard is used to gather info on how the RS2 process is to be performed. Select the
method to be used and the source location of the OS image. By default the OS image on the RS2 DVD is
used. By pressing the button labeled Image File you can browse to the preferred OS image if, for instance, it
has been placed on a network drive.
3. The third screen of the Wizard allows you to confirm the information before the RS2 process is started. When
you click on the Next button, you are asked to confirm that you want to start the RS2 process. This is the last
chance to abort RS2.
4. The fourth screen of the Wizard shows the status of the process. This process could take 30 minutes or more
depending on the size of the operating system image, USB or network transfer speed, etc.
5. The last screen of the Wizard shows the result of the RS2 process.
6. When prompted, click Finish to close the Wizard and press any key to shutdown the computer.
7. Remove the RS2 media when the system has been shutdown to avoid booting up into RS2 again.
8. Your Thor VX9 has now completed the RS2 process.

Thor VX9 Drivers CD-ROM

VX89500DRIVERS - For Thor VX9 B with Intel Atom or Core2Duo CPU
VX89A499DRIVERS - For Thor VX9 A with Intel Pentium or Celeron CPU
The Thor VX9 Drivers CD-ROM contains files that may be necessary for configuration of the Thor VX9 computer. It is rec-
ommended that the device drivers CD be available during Microsoft Windows installation and configuration. Since the Thor
VX9 does not have a CD-ROM drive, the device drivers can be copied to a USB jump drive or accessed via a USB CD
drive. The device drivers can also be copied to a location on the network if a network connection is used to install the Win-
dows OS.
After Microsoft Windows is installed, device drivers contained on the CD can be used to update default Windows device
drivers, if necessary.
For more information on installing or updating Microsoft Windows device drivers, please refer to Help and Support on the
Windows Start menu or commercially available Windows documentation.
4 - 18